foundry_skills_logo_slogan_rgb_negativ_final.png

FORMSTOFFAUFBEREITUNG

foundry_skills_logo_slogan_rgb_negativ_final.png

Der Formsand von verlorenen Formen muss nach dem Abguss wieder aufbereitet werden, um ihn wiederzuverwenden. Dazu gibt es verschiedene Stationen innerhalb der Formstoffaufbereitung, welche in diesem Kanal zu sehen sind.

Mehr Informationen auf giessereilexikon.com

HA GROUP Logo (für weiße Hintergründe).png
ASK_Logo_rgb.png
Screw mixer overview
00:19
Vibrating grid overview
00:12
Moulding material with casting on emptying grid
00:22
Continuous mixer detailed view of filling process
00:39
Detailed view of a screw mixer
00:14
Emptying grid overview
00:14
Emptying grid partially filled with sand nodules
00:18
Emptying grid without castings and sand
00:13
Emptying grid with castings overview
00:24
Ejection station for flasks
00:15
Cast flask on emptying grid
00:29
Continuous mixer overview
00:10
Continuous mixer detail view
00:18
Emptying grid with transport troughs
00:18
Dismantled vibrating plates of a emptying grid
00:37
Emptying grid overview
00:20
Decoring station with shock waves
00:23
Decoring station with shock waves detail view
00:19
Vortex mixer overview
00:11
Turning of a casting to be decored
00:47
Overview of moulding material preparation
00:24
Screw mixer over hand mould
00:16
Screw mixer in hand moulding shop
00:21
Screw mixer detail view
00:24
Moulding material bunker overview
00:09
Rear side emptying station
00:26
Polygonal sieve in motion
00:13
Periphery of a helix mixer
00:19
Manual decoring station
00:12
Running emptying station detail view
00:30
Moulding material lumps in emptying grid
00:11
Moulding material removal  by jackhammer
00:15
Moulding material bunker above  screw mixer
00:22
Moulding material on conveyor belt
00:10